Klarstein ELEONORA Mode D'emploi page 32

EN
ILLUMINATION COLOR (Automatic Color Change)
Press and hold the LIGHTING COLOR button for 3 seconds to enter the
automatic color change mode. Initially, the blue illumination gradually
changes from dark to light. When the blue light is at its brightest, the green
light gradually begins to light up. When the green light is brightest, the blue
light gradually fades out. After the blue light goes out, the red light gradually
begins to light up. When the red light is brightest, the green light gradually
fades out. After the green light goes out, the blue light gradually begins to
light up. When the blue light is brightest, both the blue light and the red light
are at their highest levels. Then the green light gradually begins to light up.
All the lights then glow brightly for two seconds, after which the red and
green lights fade. After the red and green lights have gone out, the lamp turns
blue again. The automatic colour change is repeated. Press and hold the
LIGHTING COLOR button again for 3 seconds to turn off the function and
backlight of this button.
When the automatic color change is activated, briefly press the
ILLUMINATING COLOR button once to stop the color change and maintain
the current color. Press the button again to reactivate the color change.
If the color change pauses at a specific color, press and hold the
ILLUMINATING COLOR button for 3 seconds to turn off the light and save the
set color.
32