Operation - Klarstein ELEONORA Mode D'emploi

EN
30
Fasten the outer chimney to the cooker hood with 2 ST4*8 mm screws. Fasten the
bracket for the outer chimney to the wall with ST4*40 mm screws.
Adjust the height of the inner chimney correctly and fix the inner chimney to the wall
with 2 ST4*8 mm screws.

OPERATION

Commissioning
After you have connected the cooker hood to the mains, all of the buttons light up
briefly. The cooker hood then switches to standby mode.
Control panel and key functions
POWER button and display
Press the POWER button once. The button backlight turns on and the display
shows [0]. The cooker hood is now ready for operation. Press the POWER
button again, the backlighting of the buttons goes out, the appliance turns off
and returns to standby mode.
If you switch the appliance on but do not press any key within 2 minutes, the
backlighting of the keys will automatically go out.
5