Sony FWD-50PX1 Mode D'emploi page 60

Location and Function of Parts and Controls
Optional adaptors (Not supplied)
The VIDEO connectors are slot-in connectors. You
can install any of the following adaptors in the
display.
For details on installation, consult your Sony dealers.
RGB/COMPONENT INPUT ADAPTOR BKM-
FW11 (Not supplied)
1
2
3
COMPONENT/RGB input connectors
1 AUDIO (Stereo minijack) : Inputs audio signal.
Connects to the audio signal output of a piece of
video equipment or a computer.
2 HD VD (BNC-type) : Connects to the
synchronous signal output of a computer.
3 Y/G, P /C /B, P /C
B B R R
to the component signal output or analog RGB
signal output of a piece of video equipment or a
computer.
10
(GB)
/R (BNC-type) : Connects
RGB/COMPONENT ACTIVE THROUGH
ADAPTOR BKM-FW12 (Not supplied)
1
2
3
1 AUDIO IN (Stereo minijack) :
Inputs audio signal. Connects to the audio signal
output of a piece of video equipment or a computer.
2 RGB/COMPONENT OUT (D-sub 15-pin) :
Connects to the component signal input or analog
RGB signal input of a piece of video equipment or a
computer.
3 RGB/COMPONENT IN (D-sub 15-pin) :
Connects to the component signal output or analog
RGB signal output of a piece of video equipment or a
computer.
For details on inputting a component signal to the
connector, see "Pin assignment" on page 47(GB).
Note
When the unit is not connected to an AC power or is
in the standby mode, no signal is output from the
RGB/COMPONENT OUT.