Changing/Setting The Cooking Time; Setting The End Time; Turning On And Off Automatically; Oven Switch-Off - Kuppersbusch EEB6860.1 Manuel D'utilisation

Changing/setting the cooking time

The cooking time is pre-programmed for the automatic cooking recipes
but can be changed. There is no pre-programmed time for conventional
cooking functions.
Touch . This will light up in red.
By turning the function selector you
can see the clock operating functions
on the display.
When you have the chosen the cooking
duration function , press the function
selector. You will see the
the 0:00 reading on the display
Turn the function selector to select the
cooking duration. Finally, press the
function selector. You will hear a double
beep and see the symbol
When the programmed cooking time has fi nished, the oven will switch
itself off, an alarm will sound briefl y and
Touch to stop the alarm. The oven will display the current time and
lit up in white. The oven is now off.

Setting the end time

The end time is when the oven turns off.
You can combine the cooking time and the end time. See "Turning on
and off automatically".
Touch . This will light up in red.
By turning the function selector you
can see the clock operating functions
on the display.
Turn the function selector to select the
End Cooking Time setting
press the function selector. You will see
the symbol and the current time on the display.
Turn the function selector to select the
end cooking time setting. Finally, press
the function selector. You will hear a
double beep and see the symbol
34
symbol and
and the selected cooking time.
and will start fl ashing.
, and then
and the cooking time.
When the programmed end time is reached, the oven will switch itself
off, an alarm will sound briefl y and
Touch to stop the alarm. The oven will display the current time and
lit up in white. The oven is now off.

Turning on and off automatically

If you wish to use the oven at a later time, the cooking time and end
time can be combined. The cooking start time, when the oven turns on
automatically, is programmed as a combination of both settings and
cannot be set on its own.
Example:
It is 8:00 and at 13:00 you want to remove a roast from the oven that will
take 90 minutes to cook.
Enter 1:30 as the cooking time, following the instructions explained in
the section "Setting the cooking time".
Then, change the end time from 9:30 to 13.00, following the instruc-
tions "Setting the end time".
The settings are automatically accepted.
Set the conventional cooking or automatic cooking function. Put the
food for roasting in the oven.
The oven will turn on at 11:30 and will fi nish cooking at 13:00.

Oven Switch-Off

Touch . The oven is off. You will be able to see the correct time and the
symbol in white on the display.

Additional settings

Alarm setting

You can set an alarm on your oven, even if it is not being used.
Touch . This will light up in red.
By turning the function selector you
can see the clock operating functions
on the display.
When you have set the timer function
, press the function selector. You will
see the symbol and the 0:00 reading
on the display.
Turn the function selector to set the
time after which the alarm should
sound. Finally press the function
selector. You will hear a double beep
and see the symbol and the selected alarm time on the display.
When the set time is reached, an alarm will sound and
start fl ashing. Touch to stop the alarm.
and will start fl ashing.
and will