Burner Removal; Control Module Removal - Napoleon LV50N Instructions D'installation Et D'opération

11.4 BURNER REMOVAL

Remove the safety screen and glass door, refer to the "SAFETY SCREEN INSTALLATION /
A.
REMOVAL" & "DOOR INSTALLATION / REMOVAL" sections for details.
Remove the pilot housing by removing the two screws.
B.
Remove the 12 screws (6 per side) that secure the media tray in place. Lift the burner assembly up
C.
and out of the appliance.

11.5 CONTROL MODULE REMOVAL

Remove the safety screen and glass door, refer to the "SAFETY SCREEN INSTALLATION /
A.
REMOVAL" & "DOOR INSTALLATION / REMOVAL" sections for details.
Remove the 2 screws holding the control module in place, unplug and remove.
B.
Replace and reinstall components.
C.
CONTROL MODULE
55
EN
W415-1439 / A / 07.10.15