Tanita AM-161 Manuel D'instruction page 13

Collecting Your Measurement Data
Sending Measurement Data to Your Smartphone
・ Measured values are recorded to the memory once every hour on the hour. To ensure that accurate measure-
ment data is sent, we recommend that you do not send data within five minutes before or after the hour.
→ This may cause data loss if the clock of the Activity Monitor is not accurate.
・ Try to send measurement data each day
→ The Activity Monitor can store 15 days of data (including the current day), but from the 16th day, the
oldest data is overwritten with the new data.
・ Measurement data cannot be sent to multiple smartphones.
→ Data that has already been sent cannot be resent.
TOP
Select "Input Data" → "Steps" → "Input from device".
" " Button
When instructed to by the app, press and hold the
the Activity Monitor for two seconds or more.
NOTE :
If "Re-connection" is displayed in the app, tap it to operate
your device.
" " is displayed after this, indicating that a connection can be made
within the next two minutes. ("
NOTE :
To cancel communication after "
hold the "
loss, communication cannot be cancelled while data is being
sent (while "
The measurement data is sent to the Smartphone and "
NOTE :
If the connection fails, follow the steps above again.
Refer to each app for instructions on how to use the apps.
REQUEST
" flashes during communication.)
" button for two seconds or more. To avoid data
" is flashing).
13
" " button of
" is displayed, press and
" turns off.