Security Measures - KRONAsteel KAMILLA slim 500 Guide De L'utilisateur

EN Application sheet
For the User
ATTENTION! Install and operate the device
in accordance with the Instructions.
IMPORTANT NOTES
This kitchen hood is to be used by house-
holds only. Use for other conditions is inad-
missible, and warranty does not cover such
cases.
Before installation and film removal, make
sure that the kitchen hood functions in all
working modes (See the Kitchen Hood In-
stallation section).
All works related to installation, connec-
tion and repairs should only be performed
by qualified technicians specializing in the
product.
The manufacturer is not liable for any fail-
ures and breakdowns that are related to
wrong installation, connection and repair.
The model name and important techni-
cal characteristics of the kitchen hood are
specified inside the case.

SECURITY MEASURES

The kitchen hood is connected to the pow-
er network with the voltage of 220/240 V
– 50 Hz, using a wall outlet with earthing
only. The kitchen hood has 1 electrocution
protection class.
Use the light bulbs with the voltage no
higher than specified in the Instructions.
It is forbidden to operate the kitchen hood
without an aluminum grease filter.
The air from the kitchen hood should be re-
moved to the air shaft only (its removal to
the chimney is strictly forbidden).
10
KITCHEN HOODS
KITCHEN HOOD DESCRIPTION
The external part of the kitchen hood con-
sists of the following spare parts (see Fig. 1):
1. Switch of kitchen hood engine modes;
2. Kitchen hood lamps switch;
3. Sliding panel;
4. Inserted part of the kitchen hood case;
5. Aluminum grease trap filter;
6. Latch of the grease trap filter;
7. Light bulbs.
Inside the kitchen hood, you can see the fol-
lowing elements after you remove the alumi-
num grease rap filter (see Fig. 2):
1. Engine box with the engine and impeller
inside.
2. Mounting box.
3. Lighting bulb.
4. Microswitch.
The microswitch creates additional comfort
while using the kitchen hood. If the sliding
panel is moved to the extreme front position,
it switches on the kitchen hood at the ventila-
tion speed you set earlier. When the sliding
panel returns to the initial position, it switch-
es off the kitchen hood.
The supplied parts include:
1. A set of kitchen hood fixtures to the over-
head cabinet (4 self-tapping screws)
2. Adapter flange with antiback valve (See
Fig. 3).
Additional accessories for the kitchen
hood:
Charcoal acrylic scent-trap filter (as a rule,
not included in the set) (See Fig. 4).
Used for air filtration in the premises in the
recirculation mode.
You can buy a charcoal filter from a retail
seller.