Electrical Connection - AEG LAVATHERM 65470AH1 Mode D'emploi

88 www.aeg.com
can cause interference with the opera-
tion of the appliance.
• The temperature of the hot air
• When the tumble dryer oper-
• If it is necessary to move the
• The appliance must not be in-
It is possible to adjust the height of the
tumble dryer. To do that adjust the feet
(see picture).
15mm
12.2 Unpacking
CAUTION!
Before use all parts of the transport
packaging must be removed.
To remove the polystyrene blockages:
1. Open the load door.
2. Pull plastic hose with the polystyrene
blockages out from the drum.
which occurs in the tumble dry-
er can increase to 60 °C. The
appliance must not be instal-
led on the floor which is not re-
sistant to high temperatures.
ates, the room temperature
must not be lower than +5 °C
and higher than +35 °C. This
can cause unwanted effect on
the performance of the appli-
ance.
appliance, it must be moved
vertically.
stalled behind a lockable door,
a sliding door, a door with a
hinge on the opposite side to
that of the appliance in such a
way that a full opening of the
tumble dryer is restricted.
12.3 Installation under a
counter
The appliance can be installed as free-
standing or below the kitchen counter
with correct space (see picture).
600 mm
600 mm
> 850 mm
12.4 The load door reversal
The load door can be installed by the
user in the opposite side. It can help to
easily put and remove the laundry or if
there is a limit to install the appliance.
(see separate leaflet).

12.5 Electrical connection

• Connect the machine to an earthed
socket, in accordance with current wir-
ing regulations.
• Make sure that the electrical data on
the rating plate agrees with the power
supply.
• Always use a correctly installed shock-
proof socket.
• Do not use multiple plugs and exten-
sion cables. There is a risk of fire.