Maintenance And Cleaning - Everglades EVBI510 Mode D'emploi

MAINTENANCE AND CLEANING

Cleaning the machine in regular intervals prolongs the machine's service life.
Oil and lime may accumulate in the machine's washing section. In case of such accumulation;
-Fill the detergent compartment without loading any dishes into the machine, select a programme that
runs at high temperature, and start the machine. In case of insufficiency, use special cleansing
material available in the market. (Cleansing material produced special to machines by detergent
producers.)
Cleaning the seals in the machine door,
-To clean any accumulated residues in the door seals, wipe the seals regularly by using a dampened
cloth.
Cleaning machine,
Clean the filters and spray arms at least once a week.
Unplug your machine and turn off its tap before starting the cleaning.
Do not use hard materials when cleaning your machine. Wipe with a fine cleaning material and a
dampened cloth.
Filters
Check if any food wastes have remained on the coarse and fine filters.
If any food wastes are left, remove the filters and clean them thoroughly
under the water tap.
a. Micro Filter
b. Coarse Filter
c. Metal/Plastic Filter
To remove and clean the filter combination, turn it counter clockwise and
take it out by lifting upwards.1
Pull and remove the metal/plastic filter.
Then pull the coarse filter out of the micro
filter.2 Rinse it with lots of water under the
tap. Refit the metal/plastic filter. Insert the
coarse filter into the micro filter in a way that
the marks will correspond to one another.
Attach micro filter into the metal/plastic filter
and turn to the direction of arrow and it is
locked when the arrow on micro filter can be
seen from across. 4
Never use your dishwasher without any filter.
•
Incorrect fitting of the filter will reduce the washing effectiveness.
•
Clean filters are very important in terms of the proper running of the
•
machine.
3
48