Everglades EVBI510 Mode D'emploi page 41

Adjust the water softener according to how hard your tap water is.
Move the programme selector knob to the 0 (Reset) position while your machine is
not in operation.
After resetting your machine, press the Start/Pause button and keep it pressed
2
down.
Meanwhile, energise the machine by pressing the Power On/Off button.
Keep Start/Pause keys press until program monitor lights are on and off.
After the lamps "Wash Dry/End" have flashed
2
button.
Your machine displays the latest entered water hardness setting.
You can adjust the levels by pressing the Start/Pause button
Table of Water Hardness Level Settings.
After adjusting the water hardness level , press on/off button to save the
settings in memory.
1
4
39
,
3 release the Start/Pause
2
according to
4
2