Switching On The Machine And Selecting A Programme; Changing A Programme - Everglades EVBI510 Mode D'emploi

SWITCHING ON THE MACHINE AND SELECTING A PROGRAMME

Switching on the machine
The lamp on Program Start/Pause key
goes off once the Program starts and
the washing/drying lamp is highlighted.
Program follow-up
You can follow the program flow using the program follow-up lambs located on the control panel.
As long as Washing and Drying goes
on the Washing/Drying lamp goes on
to light .When drying is active machine
stays silent about 40-50 minutes.

Changing a programme

If you would like to change programs while a washing program is continuing.
Press once the Power
Start/Pause key.
Once the Power On/Off key
is pressed, the lamp Power
Start/Pause is highlighted.
After the program stops, select
your desired program via the
Program selection button.
Once the program is over, the
lamp Finished is illuminated.
46
1. Press the Power On/Off key.
2. Select the program suiting your
dishes via the Program Selection
button.
3. Start the program pressing
the Power Start/Pause key.
Do not open the cover before
the lamp Finished is on.
The new program started
will resume the course of
the old program.
Start the program you have
newly selected by pressing
again the Start/Pause key.