Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
4.
Install the printer driver.
-
Important! If you see a warning stating that the software did not pass Windows Logo testing, select Continue
Anyway.
Note: If the driver is being installed for the first time, make sure that the software CD is in the PC disc drive.
a.
Access the print settings. In Windows select: Start > Printers and Faxes. The Printers and Faxes dialog box
opens.
b.
Start the Add Printer Wizard.
i.
Select Add Printer. The Add Printer Wizard opens.
ii.
Select Next. A Local or Network Printer dialog box opens.
iii.
Select the Local Printer option button.
iv.
Clear the Automatically detect and install my Plug and Play printer checkbox.
v.
Select Next. The Select the Printer Port dialog box opens.
vi. Select the Use the following port option button.
vii. From the list of available ports, select the desired printer port.
Note: If more than one port is listed, select the first USB port.
viii. Select Next. The Install Printer Software dialog box displays.
c.
Select the printer driver file.
i.
Select Have Disk. The Install From Disk dialog box opens.
ii.
Select Browse.
iii.
Access the folder containing the Prism driver file:
•
If you just downloaded the driver, select: C: > Win2k_XP.
•
If you are installing the driver for the first time, browse to the software CD and select: Printer Drivers >
Prism > Win2k_XP.
iv.
Select the ccd2kxp.inf file.
v.
Select Open.
vi. Select OK. Rimage Perfect Image Printer PF displays in the Printers list.
vii. Select Next.
•
If the driver is being installed for the first time, the Name Your Printer dialog box opens. Skip to step e.
•
If the Prism printer driver was previously installed, the Add Printer Wizard asks whether you wish to keep the
existing driver or replace it.
viii. Select the Replace Existing Driver option button.
ix. Select Next. The Name Your Printer dialog box opens.
Set up the printer.
d.
-
Important: Do not change the printer name.
i.
In the Name Your Printer dialog box, select the Yes option button to use this printer as the default printer, if
desired.
Select Next. The Printer Sharing dialog box opens.
ii.
iii.
Select the Do not share this printer option button.
iv.
Select Next. The Print Test Page dialog box opens.
v.
Select the No option button.
vi. Select Next. The Add Printer Wizard displays the printer settings you have specified.
vii. Select Finish.
-
Important! If you see a warning that states that the software did not pass Windows Logo testing, select
Continue Anyway.
110635_K
Set Up a Standalone Prism Printer
15
Publicité
Chapitres
Table des Matières
