Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
GEARTRACK
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."
These words mean:
WARNING
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
GEARTRACK
Parts and Tools
Remove all parts and fasteners from their packaging, and
■
dispose of/recycle all packaging materials.
Gather the required tools and parts before starting installation.
■
Read and follow the instructions provided with any tools listed
here.
GearTrack
Masonry
Parts
/ Poured
Concrete
#8 x 1¼" (3.08
cm)*
#8 x 2" (5.08 cm)
(included)*
3/16" (4.76 mm)
x 1¾" (4.45 cm)**
Construction
adhesive
* Use an all-weather flat-head type deck screw.
** Use a flat-head type masonry screw.
2
CHANNELS INSTALLATION SAFETY
®
Your safety and the safety of others are very important.
DANGER
CHANNELS INSTALLATION
®
INSTRUCTIONS
Channels - PARTS
®
Drywall Over
Wood Studs
Bare Wood
1/2"(1.3 cm),
Studs
5/8" (1.6 cm),
3/4" (1.9 cm)
You can be killed or seriously injured if you don't immediately
follow instructions.
You can be killed or seriously injured if you don't follow
instructions.
GearTrack
Masonry
Tools
/ Poured
Concrete
Level
Tape Measure
Cordless Drill
1/8" (3 mm) Drill
Bit for Pre-drilling
holes
Stud Finder
Ac Finder
Square
Pencil
Jigsaw
Hammer Drill
Caulk Gun
5/32"(3.9 mm)
Masonry Drill Bit
Channels - TOOLS
®
Drywall Over
Wood Studs
Bare Wood
1/2"(1.3 cm),
Studs
5/8" (1.6 cm),
3/4" (1.9 cm)
Publicité
Table des Matières
