Important Safety Instructions; Related Equipment Safety; Transport - Dacor DOC30M977D Instructions D'installation

Important safety instructions

Related equipment safety

Remove all tape and packaging before using the oven. Dispose of packaging after
removal so it is not a danger to children. Never modify the oven (e.g., do not remove
panels, wire covers, or screws).

Transport

Front
Pallet
WARNING
MOVING HAZARD
To avoid risk of severe personal injury; this appliance requires two or more people
while handling and moving. Use of appliance moving devices is recommended.
DANGER
ELECTRICAL SHOCK HAZARD
To avoid risk of electrical shock, personal injury, or death; verify your appliance is
grounded according to local codes or in their absence, with the National Electrical Code
(NEC). ANSI/NFPA 70-latest edition.
Electrical Code Standards
If codes permit and a separate ground wire is used, a qualified electrical installer should
confirm that the ground path and wire gauge comply with local codes. Check with a qualified
electrical installer if you are unsure the oven is properly grounded. The oven must be
connected to a grounded-metal, permanent wiring system. Ensure the electrical connection
and wire size are adequate and comply with the National Electrical Code, ANSI/NFPA 70-
latest edition or CSA Standards C22.1-94, Canadian Electrical Code, Part 1 and C22.2 No. O-
M91-latest edition, and all local codes. A copy of these code standards can be obtained from:
National Fire Protection Association 1
Batterymarch Park
Quincy, MA 02169-7471
4
English
To avoid damaging the oven vent, support
the oven bottom from either side when
moving to the installation site. Leave the
unit attached to the pallet until it is at the
cabinet cutout, ready to be lifted into place.
CSA International
OR 8501 East Pleasant Valley Road
Cleveland, OH 44131-5575