Troubleshooting; Information Codes - Dacor DOC30M977D Instructions D'installation

Troubleshooting

Information codes

Displayed code
Occurs if control key is short for 1 min.
C-d0
Occurs if door lock is mispositioned.
C-d1
Communication between Main and Sub PBA
C-F0
was interrupted.
Communication between Main and Touch
C-F2
was interrupted.
Oven sensor is open when oven operates.
C-20
Oven sensor is short when oven operates.
Occurs if the internal temperature rises
C-21
abnormally high.
Temp probe sensor is short when oven
C-23
operates.
PCB sensor is open when oven operates.
C-30
PCB sensor is short when oven operates.
PCB temperature is abnormally high.
C-31
Steam sensor is open when oven operates.
C-70
Steam sensor is short when oven operates.
Drain-system problems.
C-72
Cooling motor is abnormally operated.
C-A2
Reason Solution
Wipe/dry the control screen; turn off
oven and try again; if issue persists,
call a Dacor service center.
Touch PAUSE/OFF and OFF, and restart
oven. If issue persists, disconnect power
to oven for 30 seconds, and reconnect; if
issue persists, call for service.
Call for service.
Touch PAUSE/OFF and OFF, and restart
oven; if issue persists, disconnect power
to oven for 30 seconds, and reconnect; if
issue persists, call for service.
Call for service.
19
English