U.S.Robotics USR8000A Guide D'installation page 11

Masquer les pouces Voir aussi pour USR8000A:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 19
Windows NT Users:
Right-click My Computer and then click Explore. Double-click Dial-Up Networking. Select your
ISP connection from the Phonebook entry drop-down menu. Click More and select Edit entry
and modem properties. Click the Server tab and then click the TCP/IP Settings button. Pro-
ceed to Step B.
Windows Me Users:
Click Windows Start, Settings, and then Dial-Up Networking. Right-click your ISP connection
and click Properties. Click the Networking tab and then click the TCP/IP Settings button. Pro-
ceed to Step B.
Windows XP Users:
Click Windows Start and then Control Panel. Double-click Network Connections. Right-click
your ISP connection and click Properties. Click the Networking tab, select Internet Protocol
(TCP/IP) from the menu, and click Properties. Proceed to Step B.
Macintosh OS 9.x Users:
Click Apple, Control Panels, and then TCP/IP. Proceed to Step B.
Macintosh OS X Users:
Click Apple, System Preferences, and then Network. Proceed to Step B.
B.
All Windows Users:
You should now be in the TCP/IP Properties window.
If the Server assigned IP address and Server assigned name server addresses options are
selected, you have a Dynamic IP address. Close any open properties windows and may proceed
with the installation of the Broadband Router.
If these options are not selected, you have a Static IP address and will need to check for the fol-
lowing information: IP Address, Subnet Mask, and Default Gateway. You may proceed to the
analogue or ISDN Connecting section.
All Macintosh Users:
Ensure that the Connect via: option is set to Connect via: Ethernet.
If the Configure: option is set to Manually, write any of the suplied information in the previous
table. Set the Configure: option to Using DHCP Server.
If the Configure: option is set to any other selection, change it to Using DHCP Server.
Click Save and close the TCP/IP or network window. You may proceed to the analogue or ISDN
Connecting section.
Before you begin – Analogue or ISDN connection
7

Publicité

Table des Matières
loading

Table des Matières