Afe Lock - Canon SPEEDLITE 320EX Mode D'emploi

AFE LockN
FE (flash exposure) lock locks the correct flash exposure setting for any
part of the scene.
With the flash mode set to E-TTL II/E-TTL autoflash, press the camera's
<A> button to enable FE lock. On some cameras, press the <B> or
<7> button.
If the subject is too far away and underexposure may result, the <D>
icon will blink in the viewfinder. Move closer to the subject and perform
FE lock again. You can also increase the ISO speed and perform FE lock
again when using a digital camera.
If the target subject is too small in the viewfinder, the FE lock might not
be very effective.
18
Focus the subject.
1
Press the <A> button.
2
Aim the center of the viewfinder over
the subject and press the <A> button.
The Speedlite fires a preflash, and
the required flash output is retained in
memory.
"FEL" will be displayed in the
viewfinder for approx. 0.5 sec.
Each time you press the <A> button,
a preflash will be fired and a new
flash exposure reading will be locked.
Take the picture.
3
Compose the picture and press the
shutter button completely.
The flash fires when the picture is
taken.
( 8 )