WamBlee W420 Manuel D'instructions page 16


Your device will try to obtain the position in the next 5 minutes.
EN

If the position is acquired before five minutes, the flash will start
and an AIS test transmission will be performed as confirmation to
the fix found.

If the position isn't acquired within 5 minutes the flash will start
and an AIS test transmission – with the default paramiters (ie
without the position) - will be performed as confirmation of the fix
reception failure.
ID code
The ID code is reported on the external label on the back plane of your
W420 AIS MSLD. This code is fixed in the device and cannot be changed by
the user.
Compatibility with AIS Chart plotter system
The W420 AIS MSLD works as an AIS SART unit. Please verify with the chart
plotter or AIS receiver manufacturer that your AIS unit is able to properly
receive the AIS message type 14 (AIS SART).
16