Safety Regulations - Titan PLC 456 000100 Notice D'installation

4.

Safety Regulations

Intended Use
This pneumatic hand crimping tool is intended to secure strapped packaged products
(profile bundles, pipes, coils, etc.) with a crimp connection.
The device was designed and built for safe operation during strapping.
The device is intended for strapping with steel packaging straps.
Possible misuse
The use of plastic straps is not allowed with this device.
The DCR/SCR crimper complies with German and European safety requirements and also
conforms to the provisions of the following EC directives:
See EC declaration of conformity of the machinery! (Page 38, 39 and 40)
The TITAN crimp system makes it possible to combine heavy single units into larger load
units: wood, wool bales, aluminum bars, etc. The use of the TITAN crimp system for the
one-way load securing of coils, stator cores, profiles, etc., eliminates the need for expensive
load securing systems and tension chains.
The DCR/SCR crimper is equipped with a suspension shackle for weightless operation.
A safety valve ensures that the tool does not automatically close when being connected to
the compressed air network. The valve also provides for a proper crimp connection. In case
of insufficient air pressure and crimping depth, the tool cannot be released from the
package.
Applied standards and specifications:
See EC declaration of conformity of the machinery! (Page 38, 39 and 40)
PLC / DCR / SCR 25 / 71
H456 EU 07/10