Parts Description; Before The First Use - Tristar FR-6904 Mode D'emploi

PartS deScriPtion

1. Lid
2. Handle
3. Basket
4. On/off button
5. Power indication light
6. Heat up lamp
7. Temperature control button

Before the firSt uSe

• Take the appliance and accessories out the box. Remove the
• Put the power cable into the socket. (Note: Make sure the
• Before using your appliance for the first time, wipe off all removable
• Place the device on a flat stable surface and ensure a minimum of
1
• This type of fryer is only suitable for use with oil or liquid fat, and not
• Using solid fat entails the risk of trapping water in the fat which will
• Also ensure that the oil/fat is not contaminated with water, for
• Never use the fryer without oil or fat as this will damage the appliance.
3
• Never pour any liquid, such as water, in the pan.
2
conSiderationS for uSinG the frYer
do
• Only use the fryer for household appliance.
4
• Only use the fryer for frying food.
5
• Only use oil or grease that is suitable for frying. Check the packaging if
6
• Ensure the level of the fat or oil is higher than the minimum and less
7
stickers, protective foil or plastic from the device.
voltage which is indicated on the device matches the local voltage
before connecting the device. Voltage 220V-240V 50Hz)
parts with a damp cloth. Never use abrasive products.
10 cm. free space around the device. This device is not suitable for
installation in a cabinet or for outside use.
for solid fat.
cause it to spatter violently when heated up.
example from frozen products, this will cause excessive spattering.
the fat or oil is suitable for this fryer.
than the maximum, so between the minimum and maximum lines. If
Deep fryer
EN
5