Connecting To A Wifi Network - Archos ARC 35 Mode D'emploi

CONNECTING TO A WIFI NETWORK

www
For this procedure to work, you need to be in a WiFi zone that will allow you to connect to it. Every time the ARCHOS is in range of
a network that you have already configured once, it will attempt to make a connection.
1 To configure a new WiFi network, go on the Home screen, tap on the Menu icon
2
In the Settings screen, select Wireless & networks.
Tap on the network you want to connect to. Then tap inside the Wireless password field to
4
make the virtual keyboard appear. We recommend that you select Show password, to be able
to see the characters you are typing.
Enter the required network information*, tap on Done, and then tap on Connect. Your
5
ARCHOS will now attempt to establish a connection to that WiFi access point with the
network parameters you entered.
* For free access WiFi points, there is no need to enter any special information. For secured networks, you will need either a key (a series of numbers
and/or letters) of the type WEP, WPA, or WPA2. Check with the person who manages the WiFi network to obtain the exact connection parameters
required.
4
35HomeConnect_PNXXXXXX_Book.indd 4
3 If the WiFi is off, tap on the Wi-Fi line to turn it on. Then select Wi-Fi settings. The ARCHOS will
scan for available WiFi networks and display them at the bottom of the screen.
, then select Settings .
22/06/2011 17:08:31