System Settings; Language Settings; Security Settings - Samsung BD-J5700 Guide D'utilisation

System Settings

Setup
By using the Setup function, you can set
the language, Network Settings, etc.
For more information about the Setup
function, refer to the Setup section of
this user manual (See page 10).
Quick Start
You can turn on the power quickly by
decreasing the boot time.
NOTES
✎
If this function is set to On, Standby power
`
.
consumption will be increased
Anynet+ (HdmI-CEC)
Anynet+ is a convenient function that
offers linked operations with other
Samsung players that have the Anynet+
feature.
To operate this function, connect this
player to an Anynet+ Samsung TV with
an HDMI cable.
With Anynet+ on, you can operate this
player using a Samsung TV remote
control and start disc playback simply
by pressing the pLAy (
) button on
the TV's remote control.
For more information, please see the TV
user manual.
NOTES
✎
This function is not available if the HDMI cable
`
does not support CEC.
16
If your Samsung TV has an Anynet+ logo, then
`
it supports the Anynet+ function.
Depending on your TV, certain HDMI output
`
resolutions may not work.
Please refer to the user manual of your TV.
If you have Anynet+ turned on, when you
`
turn off the product, disconnect, and then
reconnect the power cable, the product turns
on automatically to re-establish the Anynet+
connection. After about 15 seconds, it turns off
again automatically.
Some Samsung TVs, when connected to this
`
product using the Anynet+ function will, when
you turn them on, display a warning popup
message saying no connection has been
found. Never-the-less, the Anynet+ connection
is properly established and available to use.
Bd data management
Enables you to manage the downloaded
contents you accessed through a Blu-
ray disc that supports the BD-LIVE
service and stored on a flash drive.
You can check the device's information
including the storage size, delete the
BD data, or change the Flash memory
device.
NOTES
✎
In the external memory mode, disc playback
`
may be stopped if you disconnect the USB
device in the middle of playback.
Your player supports the FAT16, FAT32, and
`
NTFS file systems. We recommend you use
USB devices that support USB 2.0 protocol
with 4 MB/sec or faster read/write speed.
The Resume Play function may not work after
`
you format the storage device.
The total memory available to BD Data Management
`
may differ, depending on the conditions.

Language Settings

You can select the language you prefer
for the On-Screen menu, Disc menu,
Audio, and Subtitles.
NOTES
✎
The selected language will only appear if it is
`
supported on the disc.

Security Settings

When you access this function for the
first time, the PIN screen appears.
Enter the default PIN - 0000 - using the
number buttons. To change the PIN, use
the Change PIN function. Each time you
access the Security Settings hereafter,
you must enter that four digit PIN. If you
don't change the PIN, continue using
the default PIN.
Bd parental Rating
Prevents playback of Blu-ray Discs
with specific age ratings unless the 4
digit PIN is entered.
dVd parental Rating
This function works in conjunction with
DVDs that have been assigned an age
rating or numeric rating that indicates
the maturity level of the content. These
numbers help you control the types of
DVDs that your family can watch.
Select the rating level you want to set.
For example, if you select Level 6, discs
rated above 6 - Level 7 and 8 - will not play.
A larger number indicates more mature
content.
When the DVD Parental Rating function
is on, you must enter the 4 digit PIN to
play discs with restricted rating levels.
Change pIN
Change the 4-digit password used to
access security functions.
To change the PIN, follow these steps:
1. Select Change pIN, and then press
the v button. The Enter old PIN
screen appears.
2. Enter the old PIN. If you never changed
the PIN, enter the default PIN: 0000.
The Enter new PIN screen appears.
3. Enter the new PIN in the Enter new
PIN fields.
4. Re-enter the new PIN in the Confirm
new PIN fields. The "PIN is changed
successfully." message appears.
5. Press the v button.
If you forget your password
1. Remove any discs.
2. Press and hold the ^ button on the
front panel for 5 seconds or more.
All settings will revert to the factory
settings.
NOTES
✎
When the factory default settings are restored,
`
all the user stored BD data will be deleted.