ADEUNIS LoRaWAN AS-923 Pulse Guide Utilisateur page 76

LoRaWAN AS-923 Pulse - Guide utilisateur / User guide version V1.0.0
226 4
227 4
228 4
FR
229 4
258 4
EN
280 4
281 4
NOTE 1 :
The «Over The Air Activation» (OTAA) mode uses a join phase before being able to transmit on the network. This mode uses the APP_EUI (S214
and S215) and APP_KEY (S216 to S219) codes during this phase to create the keys for network communication.
Once this phase is completed, the codes APP_sKEY, NWK_sKEY and Device address will be present in the corresponding registers.
A new join phase is started every time the product comes out of Command mode, a reset is performed or the product is turned on.
Codes:
• APP_EUI identifier for global use (provided by default by adeunis®)
• APP_KEY device application key (provided by default by adeunis®)
The «Activation by personalization» (ABP) mode has no join phase; it transmits directly on the network using the codes NWK_sKEY (S222 to
S225), APP_sKEY (S226 to S229) and Device address (S281) to communicate.
Codes:
• NWK_sKEY network session key (provided by default by adeunis®)
• APP_sKEY applicative session key (provided by default by adeunis®)
• DEVICE ADDRESS Address of the device in the network (provided by default by adeunis®)
LORA APP_SKEY Hexadecimal Default: 0
(first part – MSB)
LORA APP_SKEY Hexadecimal
(second part -
MID MSB)
LORA APP_SKEY Hexadecimal
(third part - MID
LSB)
LORA APP_SKEY Hexadecimal
(fourth part – LSB)
Band type Decimal
NETWORK ID Hexadecimal Default: 0
DEVICE ADDRESS Hexadécimal Défaut : 0
Parameter encoded on 16 bytes. Each of the 4 registers contains 4 bytes.
Read-only
0 : EU868
1 : AS923
2 : US915
3 : US915 Hybrid
4 : AU915
Page 76 of 99