Changing Oil - Honda Power Products EX7 Manuel De L'utilisateur

1.CHANGING OIL

Drain the oil while the engine is still warm to assure rapid and complete
draining.
CAUTION:
Make sure to turn the engine switch and the fuel cap vent lever to the
OFF position before draining.
1.Loosen the cover screw and remove the left side maintenance cover.
2.Remove the oil filler cap.
3.Drain dirty oil into a suitable container thoroughly.
4.Refill with the recommended oil (see page 14) and check the oil level.
5.Reinstall the oil filler cap securely.
6.Wipe off all the spilled oil from the generator.
7.Reinstall the left side maintenance cover and tighten the cover screw
securely.
COVER SCREW
LEFT SIDE MAINTENANCE COVER
OIL FILLER CAP
OIL FILLER HOLE
Wash your hands with soap and water after handling used oil.
NOTE:
Please dispose of used motor oil in a manner that is compatible with
the environment. We suggest you take it in a sealed container to your
local service station for reclamation. Do not throw it in the trash or pour
it on the ground.
34
UPPER LIMIT