Honda Power Products EX7 Manuel De L'utilisateur page 29

AC Circuit Protector
The AC circuit protector will automatically switch OFF (push button
comes out) if there is a short circuit or a significant overload of the
generator at receptacle.
If an AC circuit protector switch OFF automatically, check that the
appliance is working properly and does not exceed the rated load
capacity of the circuit before resetting the AC circuit protector ON
(pushing the push button in).
NOTE:
If an overloaded circuit trips the AC circuit protector, reduce the
electrical load on the circuit, and wait a few minutes before resuming
operation.
The yellow indicator inside the circuit protector button will pop out to
show that the circuit protector has switched off. Push the button in to
reset the circuit protector.
26
OFF ON
AC RECEPTACLE
AC CIRCUIT
PROTECTOR