Problems And Solutions; Outgoing Calls; Incoming Calls - Fysic FX-8025 Manuel D'utilisation

Masquer les pouces Voir aussi pour FX-8025:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

16 PROBLEMS AND SOLUTIONS

16.1 OUTGOING CALLS:

• There's no dialling tone.
- The outside line is being used by (one of) the
wireless handset(s). Wait until that call is finished
and try again.
- Check the connection between the base and your
telephone connection (when in doubt, connect a dif-
ferent telephone to your telephone connection).
• The power supply is lost.
- Check whether the adaptor is plugged into the
back of the phone and make sure the power adap-
tor is plugged into a wall socket marked with 230V
(you can check this by e.g. connecting a floor lamp
to that wall socket).

16.2 INCOMING CALLS:

• No notification of incoming calls:
- The bell is disabled; enable it. (see paragraph
13.1)
- Check the connection between the phone and
your telephone connection (when in doubt, connect
another telephone to your telephone connection)
• You are continuously busy:
- Check whether you have a 2nd phone with its
- Check whether (one of) the wireless handset(s)
registered to your telephone is keeping the line
busy.
- Connect another phone to your phone connec-
tion, and use this to check whether the malfunction
originates from your connection or your carrier.
205

Publicité

Table des Matières
loading

Table des Matières