Call Transfer - Fysic FX-8025 Manuel D'utilisation

of
* 2 attention: when using the speaker function for your inter-
com call and the wireless handset disconnects the call, your
telephone will also be disconnected automatically; you don't
need to press the speaker button in this case
*: When multiple handsets are registered on the wired
telephone, you'll need to press then INT button and then use
the keypad to enter the number of the desired handset.

11.3 CALL TRANSFER:

of
*: When multiple handsets are registered on the wired
telephone, you'll need to press then INT button and then use
the keypad to enter the number of the desired handset.
put down the receiver or press
the speaker button to discon-
nect the call
zie *2
during a call with the outside line,
press the INT(*) button;the wire-
INT
less handset will start ringing
as soon as the wireless hand-
set answers, you can announce
the outside line
* if the wireless handset doesn't answer,
you can press the INT button again to
continue the call with the outside line
put down the receiver or press
the speaker button to discon-
nect the call; the outside line
will be transferred to the wire-
less handset
194