Samsung AM0 TNZDCH Série Manuel D'installation page 36

Setting an indoor unit address and installation option
Step 5. Check operation
1. Set the indoor unit address and installation option with remote controller option. Set the each option separately
since you cannot set the ADDRESS setting and indoor unit installation setting option at the same time. You need to
set twice when setting indoor unit address and installation option.
2. Take the batteries out of the remote controller to exit programming mode and insert them again and then press the operation button.
3. Reset Indoor Unit after option code programming.
Setting an indoor unit address (MAIN/RMC)
1. Check whether power is supplied or not.
‐ When the indoor unit is not plugged in, there should be additional power supply in the indoor unit.
2. Before installing the indoor unit, assign an address to the indoor unit according to the air conditioning system plan.
3. Assign an indoor unit address by wireless remote controller.
‐ The initial setting status of indoor unit ADDRESS(MAIN/RMC) is
"0A0000-100000-200000-300000" (address: 00, RMC1: 0, RMC2: 0).
Option No. : 0AXXXX-1XXXXX-2XXXXX-3XXXXX
Option SEG1
Explanation PAGE
Indication Details Indication Details Indication Details Indication Details Indication Details Indication Details
Indication
and Details
0
Option SEG7
Explanation PAGE
Indication Details
Indication
and Details
1
• When "A"~"F" is entered to SEG5~6, the indoor unit MAIN ADDRESS is not changed.
• If you set the SEG 3 as 0, the indoor unit will maintain the previous MAIN ADDRESS even if you input the option value of SEG5~6.
CAUTION
• If you set the SEG 9 as 0, the indoor unit will maintain previous RMC ADDRESS even if you input the option value of SEG11~12.
• You cannot set SEG11 and SEG12 as F value at the same time.
36 English
AM072TNZDCH_IM_DVM V-AHU_AA_EN_.indd 36
SEG2 SEG3
MODE Setting Main address
No Main
0
address
Main
A
address
1
setting
mode
SEG8 SEG9
- Setting RMC address
Indication Details
No RMC
0
address
-
RMC
address
1
setting
mode
SEG4 SEG5
100-digit of indoor 10-digit of indoor
unit address unit
0~9 100 -digit 0~9 10 -digit
SEG10 SEG11
- Group channel(*16)
Indication Details Indication Details
-
RMC1 0~F
SEG6
The unit digit of an
indoor unit
A unit
0~9
digit
SEG12
Group address
RMC2 0~F
2020-02-14 오전 10:33:40