Panasonic WX-CT2020 Manuel D'instructions page 10

1. Press the power button to turn off the order taker unit.
2. While holding down the buttons T and P simultaneously,
hold down the power button for two seconds to turn on
the order taker unit. The order taker unit enters the
setup mode where the indicators and buttons have dif-
ferent functions than in normal operation.
3. Select a default channel setup from four options, press-
ing the button T.
4. Press the button A/B to move to the talk setup and page
setup.
5. Select a talk mode, pressing the button T.
6. Select a page mode, pressing the button P.
7. Press the button A/B to confirm that the indicators show
the three modes selected for the default channel, talk
and page.
8. Hold down the power button for two seconds to turn off
the order taker unit, and then turn it on again. The newly
selected operation mode will be applied to the order
taker unit.
10
Hold down the power button for two seconds.
Power on.
Keep holding down.
A
B
A
B
Hold down the power button for two seconds.