Table des Matières
Publicité
USE
• Unwind the electrical cord located under the unit.
Insert the plug into the wall socket. (Check the data
plate for mains suitability.)
• Place the fan on a flat surface.
1
1H
2H
4H
low
med
hi
ON/OFF : Push this button to turn the fan on or off
TIMER: Touch it to set the timer, also the timer light will turn on. Each step for one hour.
Maximum programming of the timer: 7 hours.
SPEED: Touch it to set the fan speed, Low-Med-Hi..
OSC: Touch it to make the fan oscillate from right and left.
• Once the fan is turned on by pushing on the ON/OFF
button, the fan starts at medium speed.
• Every time the plug is removed, the user must push
the ON/OFF button again to turn the fan on.
2
The fan is equipped with a control panel on the
product and a remote control (fig.1).
•
Battery type for remote control: CR2032 (Battery
not included).
ON / OFF
SPEED
TIMER
OSC
• You can manually adjust the fan orientation in three
different positions: 0°, 45°, 90° (fig.2).
• If the power supply is interrupted, any previous
Timer setting is erased and the user must set it
again if he wants to use the Timer function again.
ENGLISH
ON / OFF
TIMER
BATTERY
POSITION
SPEED
OSC
7
Publicité
Table des Matières
