Inserting The Door Decoration - Dometic RM5310 Instructions De Montage

Inserting the door decoration

8 Inserting the door decoration
A
NOTICE! Beware of damage
Only ever place the refrigerator on its side, never on its back.
The cooling unit could be damaged otherwise.
The door decoration must have the following dimensions:
 RM5310: 532±1 x 453±1 x max. 3.8–3 (h x w x d in mm)
 RM5330: 740 x 453.5 x max. 3.8–3 (h x w x d in mm)
 RM5380: 740 x 453.5 x max. 3.8–3 (h x w x d in mm)
Proceed as follows:
➤ Remove the door (see chapter "Changing the door hinge" on page 37).
➤ Remove the three bolts on the bottom of the door frame (fig. o 1,
page 8).
➤ Take off the door strip (fig. p, page 8).
➤ Insert the new decoration in the opening (fig. q 1, page 8).
➤ Put the door strip back in.
➤ Screw the three bolts back in again.
➤ Put the door back in (see chapter "Changing the door hinge" on page 37).
If you placed the refrigerator on its side to insert the decoration:
➤ Wait for an hour before putting the refrigerator into operation.
38
RM5310, RM5330, RM5380
EN