Acqua Brevetti PuliFIL FT010 Manuel D'utilisation Et De Maintenance page 19

A1.4 Dealers and Technical Service Centers (TSC) authorized by Acqua
Brevetti
Service interventions on the equipment can be performed only by the Technical Service Centers
(TSC)authorized by Acqua Brevetti SRL. Please visit the website www.acquabrevetti.it for the list
of authorizedTSC closer to you. For more information regarding the TSC, please call Acqua
Brevetti SRL(+39.049.8973432) or send an e-mail: info@acquabrevetti.it).
A1.5 PuliFIL operation
Usually the filters that are in the market only remove the dirt accumulated in the vessel without
cleaning the cartridge. PuliFIL, thanks to its brushing + discharge patented system, guarantees an
effective and actual cleaning of the filtering cartridge too. The cleaning of the PuliFIL is easy and
immediate: it is enough to rotate clockwise the operation knob. PuliFIL's cleaning brushes are
equipped with silver inserts which contrast the bacterial proliferation in the brush itself.
A1.6 PuliFIL performance and technical datasheet
Connections
Nominal flow rate (ΔP=0.2 bar)
Nominal flow rate (ΔP=0.5 bar)
Filtration degree
Nominal pressure (PN)
Min-max water temperature
Min-max ambient temperarure
A1.7 Characteristics of the water to be treated
PuliFIL has been designed and built for treating water intended for human consumption.
Warning! PuliFIL is not designed to filter closed circuit water, water containing large
quantities of sand or coarse bodies larger than 2 mm, silt or chemicals (oils, solvents,
acids, alkalynes, glycols).
For applications other than ones described herein, please contact Acqua Brevetti SRL (phone
+39.049.8973432 or send an email to
PULIFIL - ENGLISH
Units FT010 FT012
inch ¾" F
DN 20
3
m /h 4.8
3
m /h 6.4
µm
bar
°C
°C
info@acquabrevetti.it
MAN125 PAG.EN-5
FT014 FT016
1" F 1"¼ F 1"½ M
25 32 40
6.0 6.5 12.0
9.6 10.6 22.0
89
16
5 – 30
5 – 40
FT018
2" M
50
14.2
22.6