Acoustic Warning; Cleaning The Filter Element; Applications And Techniques; Picking Up Dry Substances - Makita 447 M Notice D'utilisation

Masquer les pouces Voir aussi pour 447 M:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 29
4.4

Acoustic warning

4.5
Cleaning the filter
element
To ensure that suction performance
is always at its best, the filter ele-
ment is automatically cleaned dur-
ing operation. We recommend com-
plete cleaning if the filter element
becomes extremely dirty.

5 Applications and techniques

5.1
Techniques
5.1.1 Picking up dry
substances
Do not pick up flammable sub-
stances.
For safety reasons, an acoustic
warning sounds if the air speed
in the suction hose drops to be-
low 20 m/s. See section "Trou-
bleshooting".
After picking up harmless dust us-
ing the waste bag.
1. Switch off the vacuum clean-
er
2. Close the nozzles or suction
hose opening with the palm
If used correctly, additional ac-
cessories, suction nozzles and
suction hoses can enhance the
cleaning action and reduce the
cleaning effort.
The suction hose diameter must
suit the position of the switch in
order to pick up dry, nonflam-
mable dust with maximum room
concentration values.
There must always be a safety
filter bag in the tank before dry
substances with maximum room
concentration values are picked
up. See section 9.5 "Accesso-
ries" for ordering number.
To pick up harmless dust we rec-
ommend the use of a waste bag.
See section 9.5 "Accessories"
for ordering number. Disposal
10 sec .
of your hand.
3. Turn the switch to position „I"
and let the cleaner operate
for approx. 10 seconds with
the suction hose opening
closed.
Effective cleaning is achieved if
you follow just a few guidelines
in combination with your own
practical experience in special
fields.
Here are some basic tips.
of the picked up material is then
simple and hygienic.
After picking up liquids, the filter
element is wet. A damp filter el-
ement clogs more quickly when
dry substances are picked up.
For this reason the filter element
should be washed and dried or
replaced by a dry element be-
fore dry substances are picked
up.
Always use a filter bag/waste
bag that is suitable for the type
of dust (see table):
MAKITA 447 M
english
7

Publicité

Table des Matières
loading

Table des Matières