Linksys N300 PRO Mode D'emploi page 22

Power Light Status/ description
Blinking Green
Solid Green
Solid Amber
Blinking Amber
Side view
• Wi-Fi Protected Setup™ Button and LED (1)—Use Wi-Fi Protected Setup to automatically
and securely add compatible wireless devices to your network. Refer to Using Wi-Fi
Protected Setup on page 25.
• Reset Button (2)—Press and hold until the power light on the front of the range extender
blinks to reset to factory defaults. You can also restore the defaults from the
Administration > Factory Defaults screen in the extender's settings interface (page 23).
Booting up.
•
Resetting to factory defaults.
•
Upgrading firmware.
•
Ready to use.
•
Weak connection with the router.
•
Fix: Unplug the extender, and move it
closer to the router.
Not connected to the router or other
•
error.
Fix: Unplug the extender, plug it back in,
wait two minutes, reconnect to your
network.
21