How To Access The Settings Interface - Linksys N300 PRO Mode D'emploi

The extender supports MP3, FLAC, WAV, WMA and AAC file formats, as long as those formats
are supported by the device and app doing the streaming.
The 3.5mm stereo port supports earphones and powered speakers.

How to Access the Settings Interface

After setup use the extender's settings interface to change any settings.
On a computer or device that is connected to your range extender, open any browser
(Internet Explorer, Chrome, Firefox, Safari, etc.), and enter extender.linksys.com in the
address bar.
You will be prompted to enter a user name and password. If you did not change them
during setup, leave the user name blank and enter "admin" in the password field. If you
customized the SSID and password, enter those credentials.
If you are connected to your local network, but not to the range extender, you will need
to enter the range extender's IP address in your browser to access the extender's
settings. Find the IP address on your router's administrative interface.
10