2. In the example below, the computer was connected to another wireless network named
JimsRouter. The wireless network name of the router, BronzeEagle in this example, is
shown selected.
3. Select the wireless network name of the router you want to connect to.
4. Type your wireless network password (Security Key) into the Password field. Click OK.
You should now be able to access the range extender's settings interface.
You have intermittent connection problems
Plug in the range extender midway between your router and the area without Wi-Fi. Be
sure you have at least 50% of your router's Wi-Fi signal at that point on the device you
used for setup.
19