Linksys N300 PRO Mode D'emploi page 19

2. Click View Available Wireless Networks. A list of available networks will appear.
3. Click your own network name. Click Connect. In the example below, the computer was
connected to another wireless network named JimsRouter. Your wireless network name,
BronzeEagle in this example, is shown selected.
4. If you are prompted to enter a network key, type your password (Security Key) into the
Network key and Confirm network key fields. Click Connect.
You should now be able to access the range extender's settings interface.
NOTE Depending on your version of Windows, there could be some differences in wording or icons
in these steps.
To fix the problem on Mac computers, do the following:
1. In the menu bar across the top of the screen, click the Wi-Fi icon. A list of wireless
networks will appear. Linksys Smart Wi-Fi has automatically assigned your network a
name.
18