Setting Units And Scales; Selecting Language; Setting The Clock; Setting Rpm Alert - Pioneer AVG-VDP1 Mode D'emploi

Section
08 Setup adjustments

Setting units and scales

You can select the units and the scales of
each meter.
1 Touch Menu and then touch SETUP.
2 Touch Unit/Scale.
3 Select the units of each meter.
! To switch a unit of Speed (speed), touch
km/h or MPH.
! To switch a unit of Power (horsepower),
touch kW, ps or hp.
! To switch a unit of Torque (torque), touch
kg"m, lb"ft or N"m.
4 Select the scales of each meter.
! To select one from among three scales for
speedometer, touch Speed.
! To select one from among four scales for
tachometer, touch R"P"M.
! To select one from among three scales for
horsepower meter, touch Power.
! To select one from among three scales for
torque meter, touch Torque.

Selecting language

You can select the desired language for dis-
playing CAUTION screen and for entering
names by keyboard.
1 Touch Menu and then touch SETUP.
2 Touch Caution/Keyboard.
3 Touch the desired language.
28
En

Setting the clock

This function lets you adjust the time differ-
ence between the time originally set in this
unit and the current location of your vehicle.
1 Touch Menu and then touch SETUP.
2 Touch Clock Adjust.
3 Touch + or  to set the time difference.
Clock can be adjusted for the time difference
by one-hour.

Setting RPM alert

If you set an RPM value for caution, this unit
beeps and displays an alert message when the
RPM of your vehicle reaches the set RPM
value.
! Alert is shown in the display when the RPM
reaches to 80%, 90% and 100% of RPM
value you have set for caution.
1 Touch Menu and then touch SETUP.
2 Touch R"P"M Alert.
# When R"P"M Alert is not displayed, touch
until you see it displayed.
3 Touch Caution to turn RPM alert on or
off.
4 Touch + or  to set the value of RPM
alert.

Selecting the video format

You can switch the video output format of
VIDEO OUT between NTSC and PAL.
1 Touch Menu and then touch SETUP.