Checking The Sensor Learning Status And The Driving Status - Pioneer AVG-VDP1 Mode D'emploi

Section
07 Checking the Vehicle
Dynamics Processor Status
Checking the sensor learning
status and the driving status
You can check the learning status of the 3D
sensor and the driving status of a vehicle.
% Touch Menu and then touch
Sensor Learning Status to display the sen-
sor learning status.
4 5
1 Distance
Shows the distance driven.
2 Speed Pulse
Shows the total number of the speed pulse
detected by this unit.
3 Learning Status
Shows the current driving mode.
4 Speed
Shows the speed detected by this unit. (This
indication may be different from the actual
speed of your vehicle, so never use this in-
stead of the speedometer of your vehicle.)
5 Acceleration and deceleration in for-
ward direction/Rotational speed
Shows the acceleration and deceleration
(braking) of your vehicle in a forward direc-
tion. In addition, this shows rotational
speed when your vehicle turns to left or
right.
6 Slope
Shows the degree of slope of your vehicle.
7 Degree of learning
Shows the learning situations of Distance
(distance), Right Turn (right turn),
26
En
1 2
6 7
Left Turn (left turn) and 3D (3D) detection.
In addition, the length of bars shows the de-
gree of learning.
Resetting the learned results
You can reset the learned results stored in
Distance, Speed Pulse or Learning Status.
1 Touch Menu and then touch
3
Sensor Learning Status to display the sen-
sor learning status.
2 Touch any of Distance, Speed Pulse or
Learning Status.
Clear appears on the display.
3 Touch Clear to reset the learned result
of the selected item.
# To cancel resetting the result, touch
Cancel.