Performing A Run; Introduction Of The Running Record; Recording Your Runs - Pioneer AVG-VDP1 Mode D'emploi

Masquer les pouces Voir aussi pour AVG-VDP1:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Performing a Run

Introduction of the running
record functions
1
2
4
WARNING
The Data Recording functionality of this pro-
duct is intended to capture vehicle informa-
tion into its internal memory to be reviewed
at a later time when the vehicle is not in mo-
tion, and parked in a safe place. Only use the
Data Recording functionality if it is safe to
do so. Do not use this feature if doing so in
any way will divert your attention from the
safe operation of your vehicle. Always ob-
serve safe driving rules and follow all exist-
ing traffic regulations.
You can record throughout your runs (vehicles
behaviour). After you have recorded your runs
you can replay the desired running record.
1 Time
Shows the recording time of the selected
running record.
2 Name
Shows the name of the selected running re-
cord.
3 Record number
Shows the number of the selected running
record.
4 Function display
Shows the function names.
% Touch Replay and then touch your fa-
3
vorite list name.
The function names are displayed.
# When Replay is not displayed, you can dis-
play it by touching the screen.
# To return to the previous display, touch Back.
# To return to the normal display of each mode,
touch ESC.

Recording your runs

Your running records can be memorized in
this unit. Up to five minutes each and up to 12
records can be stored.
! While Sensor Learning.... appears, this
function cannot be used. If your vehicle is
driven for a little while, Sensor Learning....
will disappear.
1
Touch REC and then touch Yes to start
recording your run.
The recording time is displayed, the recording
begins.
# When REC is not displayed, you can display it
by touching the screen.
# When 12 records have been already stored,
MEMORY FULL is displayed.
# To cancel the recording, touch No.
2
Touch the screen and then touch Stop
to stop the recording.
Recording Complete is displayed briefly and
your running record is memorized in this unit.
# If the recording time exceeds five minutes, a
message is displayed. Touch OK and end the re-
cording.
# To cancel the recording, touch Cancel.
Section
05
17
En

Publicité

Chapitres

Table des Matières
loading

Table des Matières