Selecting Gauges; Using A Peak Hold Function - Pioneer AVG-VDP1 Mode D'emploi

Section
03 Basic Operations
1 Graph
Shows the graph of speed vs time.
2 Time (TIME)
Shows the current time.
3 Tachometer (TACH)
Shows the engine speed in revolutions per
minute (rpm).
4 Speedometer (SPEED)
Shows your vehicle speed.
5 Acceleration (ACC.G)
Shows the acceleration in a forward direc-
tion. The + sign indicates acceleration
while the  sign indicates deceleration
(braking).

Selecting gauges

You can change the combination of gauges.
! This function can be operated only when
selecting the analog mode.
1 Touch Select Gauge.
The touch panel keys for selecting the gauges
are displayed.
# When Select Gauge is not displayed, you can
display it by touching the screen.
2 Touch the middle of a gauge that you
want to change.
The cursor moves to the selected gauge.
3 Touch i or j to select the gauge type.
Each time you touch i or j selects the
gauge types in the following order:
TACH (tachometer)BATT. (voltmeter)
ACC.G (accelerometer)LAT.G (lateral ac-
12
En
celerometer)POWER (horsepower meter)
TORQUE (torque meter)tiltmeterSPEED
(speedometer)
4 Touch k or l to switch among the po-
sition of the gauges.
5 Touch ESC to return to the normal dis-
play of each mode.
# To return to the previous display, touch
Back.

Using a peak hold function

With this unit, the peak hold value will be auto-
matically stored in memory. And you can re-
call the maximum value reached for each
parameter in memory.
! This function can be operated when select-
ing the analog and the digital modes.
1 Touch Peak Hold.
The maximum value reached for each para-
meter will be displayed.
# When Peak Hold is not displayed, you can
display it by touching the screen.
# Since this unit is not designed to hold the
peak value for speed, N/A (not available) is dis-
played in the speedometer.
2 Touch the screen to display the touch
panel keys.
The touch panel keys appear in the display.
# To reset the peak hold value, touch Reset.
# To hide the touch panel keys, touch HideKey.
3 Touch ESC to return to the normal dis-
play of each mode.
# To return to the previous display, touch Back.
Note
In the analog mode, you can also change the
combination of gauges by touching i/j/k/
l.