LG SIGNATURE LUPXS3186N Manuel Du Propriétaire page 28

Réfrigérateur à porte à deux battants
Masquer les pouces Voir aussi pour LUPXS3186N:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

28
HOW TO USE
Smart Features (continued)
Override Smart Grid Mode
If you want the refrigerator to ignore the Demand
Response signal from the utility company, you
can override the Smart Grid function by pushing
the Smart Grid button while the refrigerator is in
Smart Grid mode.
When you override the Smart Grid function, the
refrigerator ignores the Demand Response signal
and is no longer controlled by the utility company
until the next Demand Response signal is sent.
You can also override the Smart Grid function
using the smart phone app.
Open API
LG Open API
You can manage Smart Grid features for the LG
Smart Refrigerator.
Please check the detailed specifications on the
notice page on us.smartthinq.com.
API list :
Demand response
- Send demand response signal
Power saving
- Set saving mode
- Get schedule of DR/Delay Defrost
Energy monitoring
- Get setting temperature
- Get door open event
- Get energy consumption
Delay defrost capability
- Insert a delay defrost schedule event
- Update a delay defrost schedule event
- Delete a delay defrost schedule event
- Get the delay defrost schedule
Smart Grid Application Features
1
Smart Saving_Demand Response
You can lower energy usage based on
Demand Response (DR) signals from the
utility company.
If the refrigerator is operating in Smart
Saving mode according to the DR signal,
you can see a pop up.
Smart Saving_Delay Defrost
Lower energy usage based on time period.
2
Energy monitoring
The refrigerator can check number of door
openings and power consumption.
3
Remote Control
You can control the Refrigerator
Temperature, Fresh Air Filter and Ice Plus
from the smart phone app.
4
Push messages.
- When the door is open over ten minutes,
you will receive a push message.
- When Ice Plus is finished, you will receive
a push message.
Open Source Software Notice
Information
To obtain the source code that is contained in
this product that was developed under GPL,
LGPL, MPL, and other open source licenses,
visit http://opensource.lge.com. In addition to the
source code, all referred license terms, warranty
disclaimers and copyright notices are available for
download.
LG Electronics will also provide open source code
on CD-ROM for a charge covering the cost of
performing such distribution (such as the cost
of media, shipping, and handling) upon email
request to opensource@lge.com. This offer is
valid for three (3) years from the date on which
you purchased the product.
Wireless LAN module Specifications
Model
LCW-003
Frequency Range
2412 to 2462MHz
Output Power
IEEE 802.11b: 17.56 dBm
(Max.)
IEEE 802.11g: 25.53 dBm
IEEE 802.11n: 25.29 dBm

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Lupxc2386n

Table des Matières