Wi-Fi Eclipse Display; Wi-Fi Eclipse Display Features - LG SIGNATURE LUPXS3186N Manuel Du Propriétaire

Wi-Fi Eclipse Display

Depending on the model, some of the following functions may not be available.

Wi-Fi Eclipse Display Features

1
2
1 Smart Grid / Connect
Smart Grid
Press the Smart Grid button to turn the Smart
Grid function On/Off. When the function is on,
the icon illuminates. The Smart Grid function
automatically turns on when the refrigerator
is connected to the Wi-Fi network. When the
refrigerator is responding to a Demand Response
(DR) message from the electric company, the
Grid text illuminates.
Connect
The Connect button, when used with the LG
Electronics Smart Refrigerator smart phone app,
allows the refrigerator to connect to your home's
Wi-Fi network. Refer to the Smart Features
section for information on the initial setup of the
application. The Connect icon indicates the status
of the refrigerator's network connection. When
the refrigerator is connected to the network, the
Connect icon is illuminated. Press and hold the
Connect button for 3 seconds to connect to the
network. The icon will blink while the connection
is being made, then turn on once the connection
is successfully made. To disconnect, press and
hold the button again.
9
3
4
2 Lock
The Lock function disables every other button on
the display.
When power is initially connected to the
y
refrigerator, the Lock function is off.
To activate the Lock function, press and
y
hold the Lock button until the lock indicator
appears in the display. The other buttons are
now disabled.
To disable the Lock function, press and hold
y
the Lock button for approximately three
seconds.
3 Auto Open Door
The right refrigerator door opens automatically
if you place a foot near the motion sensor at the
bottom of the door. This is convenient when
you have both hands full of groceries and need
to open the refrigerator door. To set the Auto
Open Door function, press the button repeatedly
to toggle between the ON, Sound Off, and OFF
settings.
Using the Auto Open Door Function
1. When the Auto Open Door Function is
enabled, text is displayed on the floor near
the motion sensor.
HOW TO USE
5 7
6 8
23