iSymphony M1 Manuel D'utilisateur page 31

MP3/WMA CD Programmed Playback
• When programming the tracks on an MP3/WMA CD you must also select the
Directory Number of the tracks being programmed.
• You can program up to 64 tracks on an MP3/WMA CD, same as for a normal CD.
• Programming can only be done while the player is in the Stop mode. If the
MP3/WMA disc is playing, first press the STOP button to stop playback, then
follow the programming steps below.
In this example the MP3/WMA CD contains a total of 11 Directories (Albums) and
172 Tracks (Files).
Let's assume that the first track we want to program is Track #003 in Album
#05.
1.) Press the PROGRAM/CLOCK button on the remote control.
The display shows Album " 00" flashing.
Track "000", Program Number "P – 01" and "PRG"
indicator appear.
2.) Press the SKIP/TUNING + button repeatedly to
select Album # 05.
3.) Press the PROGRAM/CLOCK button to enter
Album #05 in Program Memory P – 01. The track
"000" flashes.
4.) Press the SKIP/TUNING + button repeatedly to
select Track # 003.
5.) Press the PROGRAM/CLOCK button to enter
Track # 003 in Program Memory P – 01. The
Program Number display advances to "P – 02",
the Track Number returns to "000".
6.) Repeat Steps 2 through 5 to enter up to 64 tracks
in the program memory.
After you have entered up to 64 tracks in the Program Memory, press the
PLAY/PAUSE button to begin programmed playback.
1