Alternateur
LSA 41.1, 41.2, 42.1, 44.1 - 4P
SOMMAIRE
2.1 - Emplacement
- Bipaliers (poulies / courroies)
- Monopalier
- Mécaniques
- Electriques
5.6 - Valeurs moyennes
(LSA 41.1, LSA 41.2)
6.4 - Remplacement des diodes
ATTENTION : La roue polaire des alternateurs monopaliers n'étant pas arrêtée en
translation dans le stator, il est impératif de ne jamais incliner ces machines vers
l'avant lors de leur manutention.
WARNING : For single bearing machines the rotor is not locked and it is therefore
whilst handling, the alternator must be kept horizontal at all time.
Alternator
LSA 41.1, 41.2, 42.1, 44.1 - 4P
INDEX
1 - GENERAL ................................................3
2 - INSTALLATION ......................................4
2.1 - Location
- Two bearing (Belt and pulley drive)
- Mechanical
- Electrical
3.3 - Connection of output terminals
5.2 - Apparent physical defects
5.4 - Checking the rotating diodes
5.5 - Voltage build-up with separate
excitation
5.6 - Normal average values
5.8 - A.V.R. adjustment
(LSA 41.1, LSA 41.2)
6.4 - Replacement of diodes
(LSA 42.1), (LSA 44.1)
7 - PART LIST ............................................26