ohmex HET 3111 Manuel D'utilisation page 80

EN
Functioning mode:
- Press button "SET" (c) to pass from the "standby mode"
to the "functioning mode" ;
SET
- Press button "
S
shown on the display (4) if the minimum heat intensity
is set while
is set.
- Press button "
temperature (from 5°C to 40°C). Temperature is shown on
the display (4): the number on the left shows the current
temperature (room) while the one on the right shows the
set temperature.
76
SET
S
is shown on the display.
" (d) to adjust heat intensity;
is shown if the maximum heat intensity
" (e) or " " (f ) to select the desired
USE
SET
S
is
THU
S
THU
S
minimum maximum
heat heat
intensity intensity
THU
S
current
temperature temperature
HET 3111
mode
°C
h
°C
h
°C
h
set