Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
HET 3111
> > Instruction for use
When installation it's over, connect the power plug to the power socket.
Make sure that the supply voltage corresponds with the data
indicated on the appliance nameplate.
- Turn the appliance on by pressing the switch positioned on the side of the appliance
body (1).
- The appliance can be started both from the remote control (5) and from the control
panel (6) on the appliance body (1).
CONTROL THROUGH THE CONTROL PANEL (6)
a. "MIN" button
b. "MODE" button
c. "SET" button
d. "
" button
e. "
" button
f. "
" button
Standby mode:
- Once the appliance is turned on, the
on the display indicating that the appliance
is in standby mode (no heat).
• Press button "MODE" (b) for a long time to set the
hours.
• Keep button "MIN" (a) pressed to set the minutes.
• Keep button "SET" (c) pressed to set the day.
USE
a
b
c
P
symbol appears
MODE
mode
MIN
SET
6
day
hours minutes
EN
4
d
e
f
75
Publicité
Table des Matières
