Weekly Timer; Energy Saving - Mitsubishi Electric PAR-33MAA Manuel D'utilisation Simplifié

Timer, Weekly timer, Energy saving
The settings for Timer, Weekly timer, and Energy saving operation can be made from the remote controller.
Press button 4 ( MENU ) to go to the Main menu, and move the cursor to the desired setting with button 7 ( F1 )
or 8 ( F2 ). Refer to the Instruction Book of the remote controller for further information.
Timer
•
On/Off timer
Operation On/Off times can be set in 5-minute increments.
•
Auto-Off timer
Auto-Off time can be set to a value from 30 to 240 in 10-minute increments.

Weekly timer

Operation On/Off times for a week can be set.
Up to eight operation patterns can be set for each day.

Energy saving

•
Automatic return to the preset temperature
The units operate at the preset temperature after performing energy-save operation for a preset time period.
The preset time can be set to a value from 30 to 120 in 10-minute increments.
•
Setting the energy-saving operation schedule
The start/stop times to operate the units in the energy-save mode for each day of the week and the energy-saving
rate can be set.
Up to four operation patterns can be set for each day.
The times can be set in 5-minute increments.
The energy-saving rate range is 0% and 50 to 90% in 10% increments.
10
Main Main menu
Vane·Louver·Vent. (Lossnay)
High power
Timer
Weekly timer
OU silent mode
Main display:
Cursor Page
F1 F2 F3 F4
Main Main menu
Restriction
Energy saving
Night setback
Filter information
Error information
Main display:
Cursor Page
F1 F2 F3 F4