Resetting The Camera - Lorex LNZ3522B Manuel D'utilisation

10 Resetting the Camera

The camera features a hard reset button that is used to reset all cam-
era settings back to their default values. This is useful in case you've
forgotten your login information or to revert camera image settings
back to their default values.
To reset the camera:
1. Separate the camera from the mounting plate if needed and dis-
connect camera cables.
2. Remove the 2 screws from the compartment cover on the camera
base using a Phillips screwdriver (not included).
#; r. 1.0/19290/19290; en-US 26