Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
4 Camera Overview
1.
Dome Cover
2.
Ethernet Port: Connect the camera to an NVR or PoE switch on
your network using the included Ethernet cable.
3.
12V DC Power: If not using PoE, connect the camera to a 12V
DC power source (not included). Power adapters for this camera
are available for purchase on
#: CVA4902).
4.
Lens: Camera lens.
5.
Microphone: Built-in microphone.
6.
GND Port: The pre-inserted screw grounds the camera.
7.
Reset Button Compartment: Open using a Phillips screwdriver
to reveal the reset button. Press and hold for 4 seconds to reset
camera settings.
#; r. 1.0/19290/19290; en-US
www.lorextechnology.com
(model
5
Publicité
Chapitres
Table des Matières
Dépannage
